Since ancient times, people have preferred interior materials such as wood and wood, so there are many beautiful words given to wooden doors. When we push the door into the room, the first thing that comes into view is the door, which is also an important note of the "door face." With the development of the residential industry, the decoration market is becoming more and more popular, and the finished room door gradually replaces the on-site production of wooden doors, and has become an essential choice for interior decoration.
First of all, do not hang heavy objects on the door to avoid reducing the life; do not use excessive force or open angle when opening and closing the door leaf; do not use too much force when wiping the glass, so as not to hurt the person.
Secondly, when removing the stain on the surface of the wooden door, use a soft cotton cloth to wipe the surface with a hard cloth. If the stain is too heavy, use a neutral detergent, toothpaste or furniture-specific cleaner to remove the stain and then dry it. Do not rinse with water or wipe with a cloth that is too wet to prevent the door from warping
Again, be careful not to immerse the neutral agent or the cloth with moisture on the surface of the wooden door for a long time, otherwise the surface will be soaked and the decorative material on the surface will be discolored or peeled off.
Finally, pay attention to the corners of the wooden door, do not rub too much, otherwise it will cause the edge of the paint to fall off, and when the hinges, locks and other hardware accessories are loose, it is best to ask the professional staff to carry out maintenance. When the door is opened, it sounds, indicating that there is a problem with the decoration of the hinges and other hardware.
A type CPE performance
Mainly used as the impact resistant modifier of PVC. At present, it takes 95% share of the impact resistant modifier market of domestic PVC. The additive shares of H135 A type CPE as the impact resistant modifier of PVC profile shapes is 9~ 12; the shares as the impact resistant modifier of PVC water feeding pipe and other liquid transfer pipe under pressure is 4~ 6; this can effectively improve the low temperature resistant impact property of PVC product. In addition, H135A type CPE is widely added into the products including PVC plate, sheet, calcium-plastic box, case of household appliances and electrical appliance fittings to improve the mechanical property and electrical property.
H135 A type CPE can be compatible and use with most plastics and rubbers simultaneously. The polymer cross blend system with bad compatibility can take CPE as bulk filler. The rubbers used together with CPE include caoutchouc, butadiene styrene rubber, ethylene propylene diene copolymer, polyurethane rubber, acrylonitrile butadiene rubber, neoprene and chlorosulfonated polyethylene etc. The plastics used together with CPE include PVC, PE, PP, EVA and PA etc, which greatly improve the low temperature resistant impact property and increase flame resistance, oil and aging resistance, corrosion resistance and insulatibity. This can make the plastic product have high filling property and reduce production cost.
Packing and Storage :
PP bags with PE film inside, Net Weight of 25 Â± 0.2kg per bag ; as the viscoelastic and water absorption of CPE resin are strong, this product shall be stored in the dry and ventilated warehouse with stack height no more than 10 bags and avoid solarization, damp and takes strict precautions again stress. It is not dangerous cargo.
Polyethylene Film,Chlorinated Polyethylene,Polyethylene Resins,CPE Plastic Sheet
Shandong Gaoxin Chemical Co.,Ltd , http://www.gaoxinchem.com